We are a leading Manufacturer of lc/ms nitrogen generators, food packaging - nitrogen generators, lc-ms-ms nitrogen gas generator, lcms tri gas generator for ab sciex systems, nitrogen gas plant and nitrogen generator for purging from Thane, India.
LC/MS Nitrogen Generators
Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure. The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity. During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle. Flow range available from 10 LPM to 30 LPM and above.
| SPECIFICATIONS | For LC-MS (TNG-02L) | For LC-MS-MS (TNG-02LS) (for Sciex model) |
| Flow rate Capacity of N2 Generator | 6 to 30 LPM (as per selection of model) | 12 LPM (filtered zero air) |
| 8 LPM ( purified dry air) | ||
| 4 LPM (pure nitrogen) | ||
| Pressure | 5 kg/cm² or 100 psig / 60 psig | |
| Purity | 99.995% | > 99.995% |
| Moisture | 2 ppm | 2 ppm |
| Total Hydro Carbon | < 0.5 ppm | < 0.5 ppm |
| CO & CO2 | < 2 ppm | < 2 ppm |
| Micro Particulates | < 0.01μ | < 0.01μ |
| Method of purification | Pressure Swing Adsorption | |
| Room temperature | 5 °C - 45 °C | |
| Startup time | 1 hrs / programmable timer | |
| Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp | |
CE Certified
We Modify all type of LC/MS & LC MSMS Nitrogen Genrator, Parker LCMS Nitrogen Generator, Peak Scientific LCMS Nitrogen Generator, Domnik LCMS Nitrogen Generator
Additional Information :
Minimum Order Quantity : 1 Piece
Food Packaging - Nitrogen Generators
Nitrogen Generator Model TNG-02T for Food Packaging
Nitrogen Gas Generator
N2 Gases for Food Packaging Purity (99%) which consist of
a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.
b) Automatic Heatless Air dryer time based operation
c) Surge receiver with pressure regulator & valve inbuilt
d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank
Air Filters for moisture, dust and oil, mist removal (set of 2 filters)
Method of Purification : PSA (pressure swing adsorption) & Depressurizations
Valves: PLC Based Pneumatic 2 Way.
Gas outlet : ¼” or ½” BSP male
Built in reservoir : storage tank provided
Power Supply : 230V AC 50 Hzs 1Ph 1.5
Micron Filters : micron filters provided
Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.
Warranty and Spares : 1 year from the date of acceptance
Capacity : 50 LPM to 1500 LPM
Purity : 99 %
Pressure : 7 kg/cm2 (100psi)
CE Certified
NITROGEN GAS GENERATOR FOR Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.
Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.
Additional Information:
Minimum Order Quantity: 1 Piece
LC-MS-MS Nitrogen Gas Generator
LC-MS-MS Nitrogen Gas Generator
Nitrogen Generator produces a continuous flow of high purity Nitrogen at selected pressure.
- The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
- Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
- During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
- Flow range available from 10 LPM to 30 LPM and above.
CE Certified
Salient Features:
- Deliver constant pressure & flow
- Fully Automatic Programmable System
- Easy Maintenance and space saving
- Effortless and easy operation
- Improves instrument performance
- Fully regenerative, durability with PSA (pressure swing absorption) technology
| N2 Generator for LCMS: | |
| SPECIFICATIONS | For LC-MS-MS (TNG-02LS) (for Sciex model) |
| Flow rate Capacity of N2 Generator | 12 LPM (filtered zero air) |
| 8 LPM ( purified dry air) | |
| 4 LPM (pure nitrogen) | |
| Pressure | 5 kg/cm² or 100 psig or 60 psig |
| Purity | > 99.99% |
| Moisture | 5 ppm |
| Total Hydro Carbon | < 0.5 ppm |
| CO & CO2 | < 2 ppm |
| Micro Particulates | < 0.01μ |
| Method of purification | Pressure Swing Adsorption |
| Room temperature | 5 °C - 45 °C |
| Startup time | 1 hrs / programmable timer |
| Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp |
Additional Information:
Minimum Order Quantity: 1 Piece
LCMS Tri Gas Generator for AB Sciex Systems
LCMS TriGas Generator for AB Sciex Systems
Features:
- Easy maintenance and space saving
- Effortless and easy operation
- Improves instrument performance
- Deliver constant pressure & flow
- Fully Automatic Programmable System
- Easy Maintenance and space saving
- Effortless and easy operation
- Improves instrument performance
- Fully regenerative, durability with PSA (pressure swing absorption) technology
Nitrogen Generator for LC-MS / LC-MS-MS
Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure.
The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
Flow range available from 10 LPM to 30 LPM and above.
| Technical Specification for N2 Generator for LCMS: | ||
| SPECIFICATIONS | For LC-MS (TNG-02L) | For LC-MS-MS (TNG-02LS) (for Sciex model) |
| Flow rate Capacity of N2 Generator | 6 to 30 LPM (as per selection of model) | 12 LPM (filtered zero air) |
| 8 LPM ( purified dry air) | ||
| 4 LPM (pure nitrogen) | ||
| Pressure | 5 kg/cm² or 100 psig or 60 psig | |
| Purity | 99.90% | > 99.99% |
| Moisture | 5 ppm | 5 ppm |
| Total Hydro Carbon | < 0.5 ppm | < 0.5 ppm |
| CO & CO2 | < 2 ppm | < 2 ppm |
| Micro Particulates | < 0.01μ | < 0.01μ |
| Method of purification | Pressure Swing Adsorption | |
| Room temperature | 5 °C - 45 °C | |
| Startup time | 1 hrs / programmable timer | |
| Electrical requirements without Compressor | 230 V AC, 50 Hz, 1 Ph, 2 Amp | |
Additional Information:
Minimum Order Quantity: 1 Piece
Nitrogen Gas Plant
Nitrogen Gas Generator Plant
PSA Nitrogen Gas plant Generator
Nitrogen Generator for Purging
Nitrogen Generator for FTIR Purging / Food Packing
Nitrogen Gas Generator
N2 Gases for Food Packaging Purity (99%) which consist of
a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.
b) Automatic Heatless Air dryer time based operation
c) Surge receiver with pressure regulator & valve inbuilt
d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank
Air Filters for moisture, dust and oil, mist removal (set of 2 filters)
Method of Purification : PSA (pressure swing adsorption) & Depressurizations
Valves: PLC Based Pneumatic 2 Way.
Gas outlet : ¼” or ½” BSP male
Built in reservoir : storage tank provided
Power Supply : 230V AC 50 Hzs 1Ph 1.5
Micron Filters : micron filters provided
Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.
Warranty and Spares : 1 year from the date of acceptance
Capacity :- 50 LPM to 10000 LPM
Purity : 99 % / 99.99%
Pressure : 7 kg/cm2 (100psi)
CE Certified
Nitrogen Gas Generator For Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.
Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.
Additional Information:
Minimum Order Quantity: 1 Piece
Nitrogen Generator for Purging
Nitrogen Generator for Purging
Nitrogen Generator for FTIR Purging / Food Packing
Nitrogen Gas Generator
N2 Gases for Food Packaging Purity (99%) which consist of
a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.
b) Automatic Heatless Air dryer time based operation
c) Surge receiver with pressure regulator & valve inbuilt
d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank
Air Filters for moisture, dust and oil, mist removal (set of 2 filters)
Method of Purification : PSA (pressure swing adsorption) & Depressurizations
Valves: PLC Based Pneumatic 2 Way.
Gas outlet : ¼” or ½” BSP male
Built in reservoir : storage tank provided
Power Supply : 230V AC 50 Hzs 1Ph 1.5
Micron Filters : micron filters provided
Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.
Warranty and Spares : 1 year from the date of acceptance
Capacity :- 50 LPM to 1500 LPM
Purity : 99 %
Pressure : 7 kg/cm2 (100psi)
CE Certified
NITROGEN GAS GENERATOR FOR Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.
Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.
Additional Information:
Minimum Order Quantity: 1 Piece
Hydrogen Nitrogen and Air Combination Gas Generator
Nitrogen & Hydrogen & Air Generator
Characteristics
Athena N2 & H2 & Air generators achieve the perfect combination of nitrogen, hydrogen and Air. Compact structure and easy operation make it the ideal gas generator. This product can be applied to various gas chromatography and analysis instruments at home and abroad.
Features
1. It can replace traditional high pressure cylinders. N2, H2 and air are generated separately or together, intermittently or continuously. The purity of gas will not decay for long time use.
2. Easy to operate, switching power on to produce gas, regular output flow, completely automatic tracking equipment.
3. Generate nitrogen through world's leading Pressure Swing Adsorption (PSA) technology, which replaces the traditional electrolyte separation technology. It is safe and convenient to operate, has no corrosion toward instrument and supplies gas for 24 hours.
4. Generate hydrogen through world leading SPE (PEM) technology. No longer need to add lye. Without alkali reversion.
5. It's powered by whole sealing silent air compressor. After purification, water, oil, dust and impurities are removed. Through pressure stable system, pure and silent air is finally produced under stable pressure.
Technical Parameters
| Model | AT-NHA300 | ||
| Gas Type | Nitrogen | Hydrogen | Air |
| Output Flow (ml/min) | 0-300 | 0-300 | 0-1000 |
| Output Pressure (MPa) | 0-0.4 | ||
| Purity(%) | 99.99 | 99.999 | Three-level Purification |
| CO2:0.039% | |||
| Oil: 0.54ppm | |||
| Power Consumption (W) | <350 | ||
| Power Voltage (V) | AC 220 50-60Hz | ||
| Weight (Kg) | 55 | ||
| Dimension (L*W*H)mm | 460*440*460 | ||
Note : Higher capacity model also available
Additional Information:
Minimum Order Quantity: 1 Piece
High Purity Nitrogen Generators
High Purity Nitrogen Generators
Nitrogen & Zero Air Generator for GC
Combination Gas Generator Model-ATNA-01A of Zero Air & N2 Gases for (for Max. 5 GC’S )
a) Air Dryer timer based operation
b) N2 purifier to remove O2 & all other unwanted
impurities & produces N2 upto Purging grade
c) Surge receiver with pressure regulator & valve inbuilt
d) Air Filters for removes moistures
Capacity of N2 Gas: 500 ml/min at 5 Kg/cm²
Capacity of Zero Air gas : 4000 ml/min at 5 Kg/cm²
Purity : 99.999%
Nitrogen Gas Generator for 5 GCs
a) Air Dryer timer based operation
b) N2 purifier to remove O2 & all other unwanted
impurities & produces N2 upto Purging grade
c) Surge receiver with pressure regulator & valve inbuilt
d) Air Filters for removes moistures
N2 Generator Model-ATN-02A of N2 Gas for Maximum 5 GC`S)
Capacity N2 Gas :- 500 ml/min at 5 kg/cm²
Purity : 99.999%
Zero Air Generator Model - ATZ-01 which will required oil free Air Compressor for GC for Max. 5 G.C.'S
Capacity :- 4000ml/min at 4 kg/cm²
Additional Information:
Minimum Order Quantity: 1 Piece
High Capacity Nitrogen Gas Generator
High Capacity Nitrogen Gas Generator
Nitrogen Gas Generator
N2 Gases for Food Packaging Purity (99%) which consist of
a) N2 Purifier to remove O2 and all other unwanted impurities to produces Nitrogen upto UHP grade.
b) Automatic Heatless Air dryer time based operation
c) Surge receiver with pressure regulator & valve inbuilt
d) Nitrogen, Air gas with regulator, Gauge and toggle valve (inbuilt) SS tank
Air Filters for moisture, dust and oil, mist removal (set of 2 filters)
Method of Purification : PSA (pressure swing adsorption) & Depressurizations
Valves: PLC Based Pneumatic 2 Way.
Gas outlet : ¼” or ½” BSP male
Built in reservoir : storage tank provided
Power Supply : 230V AC 50 Hzs 1Ph 1.5
Micron Filters : micron filters provided
Safety valve & gauges : safety valve, pressure gauges, electronic timer and solenoid valve provided.
Warranty and Spares : 1 year from the date of acceptance
Capacity :- 50 LPM to 1500 LPM
Purity : 99 %
Pressure : 7 kg/cm2 (100psi)
CE Certified
NITROGEN GAS GENERATOR FOR Food Packaging
Standard fittings like Nuts, Ferrules, Union, Couplings, clamps, Hardware Hose Pipe, Cable etc.
Nitrogen generators cover a wide Lab Gas Nitrogen Generators by ATHENA TECHNOLOGY range of flows and purities to exactly match the needs of applications including LCMS, GC, ICP, ELSD / CAD detector, Circular Dichroism and Sample Evaporation. The optional Generators incorporating an integrated oil free compressor completely eliminate any reliance on a house compressed air supply giving complete security of supply. The technology used to procure a continuous flow of high purity nitrogen is pressure swing absorption ( PSA ). This technique uses one or two carbon molecular sieves beds (CMS) to eliminate oxygen and other contaminants in the ambient air selectively.
Additional Information:
Minimum Order Quantity: 1 Piece
