Prominent & Leading Manufacturer from Thane, we offer lab nitrogen gas generators, nitrogen generator for gas chromatographs, nitrogen gas generator, zero air generator for gc, zero air gas generator for toc analyzer and nitrogen generator for lcms.
Minimum Order Quantity | 1 Piece |
Generator | SS |
Brand/Make | Athena |
Capacity | 1-5000 lpm |
Model | ATNG |
Design Type | Standard, Customised |
Nitrogen Generators--Lab nitrogen gas
Working Principle
Nitrogen generator uses electro-catalysis method to separate air gas. Stable and pure air enters electrolysis cell, and oxygen in the air is separated, then left nitrogen gas is outputted.
Features
1. Program control. Nitrogen gas could be adjusted automatically according to usage flow under stable pressure and flow.
2. Advanced technology. It uses noble metal as catalyst, high catalytic efficiency and large nitrogen production.
3. Two-level catalysis. Oxygen content in nitrogen is less than 3ppm.
4. Lower moisture in nitrogen gas.
Technical Parameters
Model |
AT-N300 |
AT-N500 |
Output Flow (ml/min) |
0~300 |
0~500 |
Output Pressure (MPa) |
0.42 |
|
Nitrogen Purity (%) |
99.999 (compared with O2 ) |
|
Input Air Pressure (MPa) |
0.4 |
|
Power Voltage (V) |
AC 220V 50~60Hz | |
Input Power (W) |
110 |
200 |
Weight (kg) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Capacity | 100 ml/min - 1000ml/min |
Model | ATN |
Design Type | Standard, Customised |
Nitrogen Generator for GC
Being a client-centric organization, we are engaged in providing Nitrogen Generator for GC. Our skilled technocrats manufacture this generator from premium quality components and modern technology in compliance with predefined industry standards. This generator is used with thermal instruments, turbo generator (n2 concentrator), and all analytical instruments. Ahead of its final dispatch, this generator is duly checked by our quality experts on several parameters of quality. This generator is available in the market at an affordable price.
Features:
Nitrogen Gas Generator:
Technical Specification :
SPECIFICATIONS |
Nitrogen Gas Specification of TNA-01 & TNA-01A |
Zero Air Specification of TNA-01 & TNA-01A |
|
Flow Rate |
|
|
|
Capacity of TNA-01 |
500ml/min at |
4000ml/min |
|
Capacity of TNA- 01A |
200ml/min |
1500ml/min |
|
ATN-02 (M) |
500ml/min to 10 LPM |
--- |
|
Pressure |
5 kg/cm² |
||
Moisture |
< 2 ppm |
< 2 ppm |
|
Oxygen |
< 5 ppm |
— |
|
Total Hydro Carbon (THC) |
< 0.3 ppm |
< 0.3 ppm |
|
CO & CO2 |
< 2 ppm |
< 2 ppm |
|
Purity |
UHP / GC grade |
UHP / GC grade |
|
Micron particulates |
< 0.01μ |
< 0.01μ |
|
Method of Purification |
Pressure Swing Adsorption (PSA) & Depressurizations |
||
Start up time |
2 hr / programmable by timer |
10 min |
|
Electrical requirements |
230 V AC, 50 Hz, 1 ph, 5 Amp |
Applications:
Additional Information:
Minimum Order Quantity | 1 Piece |
Athena Grey | N2 generator |
Brand/Make | Athena |
Automatic Grade | Automatic |
Capacity | 1-5000 lpm |
Nitrogen Generator
We are dedicatedly engaged in providing a superior range of Nitrogen Gas Generator. The offered generator is widely used with analytical instruments. Making use of supreme grade components as well pioneered techniques, the provided generator is manufactured under the strict vigilance of experienced professionals at our sound manufacturing house. Owing to its salient features such as durability, easy operation, less maintenance and sturdiness, the offered generator is highly admired by our esteemed clients.
Features:
CE Certified
Salient Features:
Specifications:
|
Nitrogen Gas Specification of TNA- |
Zero Air Specification of |
Flow Rate |
|
|
Capacity of TNA-01 |
500m1/min at |
4000m1/min |
Capacity of TNA- 01A |
200m1/min |
1500m1/min |
ATN-02 (M) |
500m1/min to 10 LPM |
--- |
Pressure |
5 kg/cm2 |
|
Moisture |
<2 ppm |
<2 ppm |
Oxygen |
<5 ppm |
— |
Total Hydro Carbon (THC) |
< 0.3 ppm |
< 0.3 ppm |
CO & CO2 |
< 2 ppm |
< 2 ppm |
Purity |
UHP / GC grade |
UHP / GC grade |
Micron particulates |
<0.01p |
<0.01p |
Method of Purification |
Pressure Swing Adsorption (PSA) & Depressurizations |
|
Start up time |
2 hr / programmable by timer 10 min |
|
Electrical requirements |
230 V AC, 50 Hz, 1 ph, 5 Amp |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Athena Grey | Air Generator |
Brand/Make | Athena |
Automatic Grade | Automatic |
Capacity | TOC Generator |
Zero Air Generator for GC
Zero Air Generator produces a continuous flow of high purity Zero Air at selected pressure. The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing molecular sieve adsorber. Moisture, CO, CO2, THC and other unwanted components in the air are adsorbed, leaving Zero Air Gas of required purity. During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle. The residual impurity content of Zero Air Gas can be reduced to practically any value required for the user's application.
The Zero Air Generators are suitable for use in laboratories and industrial environments.
Technical Specification :
PRINCIPLE SPECIFICATIONS |
ATZ-01 (for 2-5 GC's) (for Imported GC) |
Moisture |
< 2 ppm |
Total Hydro Carbon |
< 0.5 ppm |
CO & CO2 |
< 2 ppm |
Purity |
GC/UHP grade |
Micro Particulates |
< 0.01μ |
Capacity of ZAG |
4 LPM at 5kg/cm² |
Method of purification |
Pressure Swing Adsorption (PSA) |
Room temperature |
5 ºC - 25 ºC |
Start up time |
5 minutes |
Electrical requirements |
230 V AC, 50 Hz, 1 ph |
for ZAG |
4 Amp |
Applications:
o GC-FID, FPD, NPD, TCD, AED
o GC-MS, LC-MS-MS, ICP / NMR
o FTIR/IR, ELSD detector
o Purging, Ampule Filling
o Thermal Instruments, Turbo Evaporator (N2 Concentrator)
o All Analytical Instruments
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Athena Grey | Air Generator |
Brand/Make | Athena |
Automatic Grade | Automatic |
Capacity | TOC Generator |
Zero Air Gas Generator for TOC Analyzer
Zero Air Generator for TOC Analyzer produces a continuous flow of high purity Zero Air at selected pressure.
Compressor takes the air from atmosphere, the hot air is than passed through copper cooling coil.
The cool air is than passed through furnace where hydrocarbons are cracked at high temperature (temp. range - 400°C to 500°C) in presence of catalyst. The furnace reaction at higher temperature breaks the hydrocarbon into CO2 & H2O.
Water is drained away through 5μ & 0.01μ filter. The modular pressure swing adsorption unit operates with alternating pressure increase and decrease. Untreated air flows under pressure through the reaction towers containing molecular sieve adsorber. Moisture, CO, CO2, THC and other unwanted components in the air are adsorbed, leaving Zero Air Gas of required purity
Salient Features:
PRINCIPLE SPECIFICATIONS |
ATZ-02 (for TOC Analyser) |
|
Moisture |
< 0.5 ppm |
|
Total Hydro Carbon |
< 0.2 ppm |
|
CO & CO2 |
< 0.2 ppm |
|
Purity |
TOC/XL grade |
|
Micro Particulates |
< 0.01μ |
|
Capacity of ZAG |
1 LPM at 5kg/cm² |
|
Method of purification |
Pressure Swing Adsorption (PSA) & HC Cracking furnace |
|
Room temperature |
5 ºC - 25 ºC |
|
Start up time |
30 minutes |
|
Electrical requirements |
230 V AC, 50 Hz, 1 ph |
|
for ZAG |
5 Amp |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Brand/Make | Athena |
Capacity | 10-100 LPm |
Model | ATG-LCMS |
Design Type | Standard, Customised |
Nitrogen Generator for LCMS
Nitrogen Generator for LC-MS / LC-MS-MS
Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure.
The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
Flow range available from 10 LPM to 30 LPM and above
SPECIFICATIONS |
For LC-MS (TNG-02L) |
For LC-MS-MS (TNG-02LS) (for Sciex model)
|
|
Flow rate Capacity of N2 Generator |
6 to 30 LPM (as per selection of model) |
12 LPM (filtered zero air) |
|
8 LPM ( purified dry air) |
|||
4 LPM (pure nitrogen) |
|||
Pressure |
5 kg/cm² or 100 psig / 60 psig |
||
Purity |
99.995% |
> 99.995% |
|
Moisture |
2 ppm |
2 ppm |
|
Total Hydro Carbon |
< 0.5 ppm |
< 0.5 ppm |
|
CO & CO2 |
< 2 ppm |
< 2 ppm |
|
Micro Particulates |
< 0.01μ |
< 0.01μ |
|
Method of purification |
Pressure Swing Adsorption |
||
Room temperature |
5 °C - 45 °C |
||
Startup time |
1 hrs / programmable timer |
||
Electrical requirements without Compressor |
230 V AC, 50 Hz, 1 Ph, 2 Amp |
CE Certified
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Capacity | 10-200 lpm |
Model | ATNG-LS |
Design Type | Standard, Customised |
Nitrogen Generator for LCMS / LC-MS-MS
Nitrogen Gas Generator produces a continuous flow of high purity Nitrogen at selected pressure.
The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
Flow range available from 10 LPM to 30 LPM and above.
Technical Specification for N2 Generator for LCMS: |
|||
SPECIFICATIONS |
For LC-MS (TNG-02L) |
For LC-MS-MS (TNG-02LS) (for Sciex model) |
|
Flow rate Capacity of N2 Generator |
6 to 30 LPM (as per selection of model) |
12 LPM (filtered zero air) |
|
8 LPM ( purified dry air) |
|||
4 LPM (pure nitrogen) |
|||
Pressure |
5 kg/cm² or 100 psig or 60 psig |
||
Purity |
99.90% |
> 99.99% |
|
Moisture |
5 ppm |
5 ppm |
|
Total Hydro Carbon |
< 0.5 ppm |
< 0.5 ppm |
|
CO & CO2 |
< 2 ppm |
< 2 ppm |
|
Micro Particulates |
< 0.01μ |
< 0.01μ |
|
Method of purification |
Pressure Swing Adsorption |
||
Room temperature |
5 °C - 45 °C |
||
Startup time |
1 hrs / programmable timer |
||
Electrical requirements without Compressor |
230 V AC, 50 Hz, 1 Ph, 2 Amp |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
White Athena | H2 generator |
Brand/Make | Athena Hydrogen Generator |
Automatic Grade | Automatic |
Capacity | 1-10 lpm |
Athena Hydrogen Gas Generator
Hydrogen Gas Generator for GC
Hydrogen Generator for GC FID
Specifications:
|
ATH-300 |
ATH-500 |
ATH-1000 |
Max Hydrogen Flow rate |
300 ml/min |
500 ml/min |
1000 ml/min |
Delivery Pressure |
0-60 psig (0-0.4 Mpa) |
||
% purity |
>99.999% |
||
Power Consumption |
150W 180W 220W |
||
Power |
198-242V (AC); 50Hz,1 Phase |
||
Min/max Temperature |
5-40°C |
||
Max. Ambient Humidity |
<85% RH |
||
Dimensions |
420 x 210 x 350mm (LxWxH) |
||
Weight |
12 kg (approx) |
||
Fluid Tank Capacity |
1.5 L |
||
Fluid Consumption |
Weekly or when level falls below 0.6 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena N2 Generator |
Automatic Grade | Semi- Automatic |
Capacity | 5-5000 lpm |
|
Application |
1.Carrier gas for various brands of GC and detectors. 2.Supplementary gas. 3.Gas for Gel Permeation Chromatograph. |
Model |
AT-NA300 |
Output Flow(ml/min) |
N2: 0-300 Air: 0-2000 |
Output Pressure(MPa) |
0-0.4 |
Purity (%) |
Three-level Purification N2: 99.99%
|
Power Voltage(V) |
|
Surrounding Requirement |
0-40 centi-degree, no dust and corrosive gas |
Power Consumption(W) |
<200 |
Weight(Kg) |
50 |
Dimension(L*W*H)mm |
460*290*760 (L*W*H) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena Nitrogen Gas Generator |
Automatic Grade | Automatic, Semi- Automatic |
Capacity | 1-2500 lpm |
Nitrogen Gas Generator
99.999% PSA
Product Instruction
We Athena (An ISO 9001:2008) N2 generator uses world advanced PSA technology, separate N2 from air. Whole equipment is controlled by programs. N2 output flow and pressure are both quite stable.
It is physical method to produce N2, compared with chemical technology, our equipment has advantages of no pollution, no corrosion. It could longer GC lifetime. It is very safety to use, long lifetime, stable quality, and very easy to use. It could completely meet requirement for kinds of GC.
Working Principle This equipment uses PSA technology to produce nitrogen. Carbon molecular sieve has different absorbing ability with nitrogen and oxygen. Under some pressure, the carbon molecular sieve could absorb oxygen, thus left nitrogen could be collected. After purification, pure nitrogen is produced. When released pressure, carbon molecular sieve could release collected oxygen into air. In next step, it could adsorb oxygen to produce nitrogen again. Whole process is cycled.
Features and Advantages1. Nitrogen generators supply ideal ultra pure nitrogen for GC (Gas Chromatography), LC/MS(Liquid Chromatograph/Mass Spectroscopy) and Thermal Analyzer.2. Continuously generate ultra pure nitrogen through Pressure Swing Adsorption (PSA) technology.3. No longer need to use inconvenient and dangerous high pressure nitrogen cylinders in laboratory.4. Compact structure. Take up very little laboratory space.5.
Technical Parameters1. nitrogen flow 0-300ml/min or 0-500ml/min2. output pressure 0-0.4MPa3. nitrogen purity 99.999%4. power voltage AC220V 50-60Hz5. input power <180w
Product Details:
Minimum Order Quantity | 1 Piece |
Brand/Make | Athena |
Automatic Grade | Automatic |
Capacity | 100-1500 lpm |
Nitrogen Gas Generator for TURBOVAP Evaporator / N2 Evaporator
Nitrogen Generator produces a continuous flow of high purity Nitrogen at selected pressure.
The modular pressure swing adsorption (PSA) unit operates with alternating pressure increase and decrease.
Untreated air flows under pressure through the reaction towers containing carbon molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed, leaving Nitrogen Gas of required purity.
During the desorption cycle, the trapped substances adsorbed are released again at low pressure and the adsorber is ready for next cycle.
Flow range available from 10 LPM to 30 LPM and above.
Technical Specification for N2 Generator for TURBO VAP EVAPORATOR / NITROGEN EVAPORATOR
SPECIFICATIONS |
For Turbo Evaporator |
|
(TNG-02T) |
||
Flow rate Capacity of N2 Generator |
50 to 700 LPM a(as per selection of model) |
|
Pressure |
5 kg/cm² or 100 psig or 60 psig |
|
Purity |
>98% |
|
Moisture |
100-200 ppm |
|
Total Hydro Carbon |
< 10 ppm |
|
CO & CO2 |
< 10 ppm |
|
Micro Particulates |
< 0.01μ |
|
Method of purification |
Pressure Swing Adsorption |
|
Room temperature |
5 °C - 45 °C |
|
Startup time |
1 hrs / programmable timer |
|
Electrical requirements without Compressor |
230 V AC, 50 Hz, 1 Ph, 2 Amp |
|
Net Weight (without compressor) (approx.) |
100 kg - 200 kg (as per selection of model) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automatic Grade | Automatic |
Arthena grey | Zero Gewnerator GC |
Brake/Make | Athena |
Capacity | 1-1000 lpm |
Zero Air Generator for GC
Air Gas Generator for GC
Features and Advantages
1.Improve analysis accuracy, lower cleaning requirement on detector.
2.Match with GC and analytical column.
3.Gas Purity: the amount of hydrocarbon is less than 0.5ppm (such as methane).
4.Low noise, without blockage.
5.Regular output flow and pressure.
6. It's durable in use and produces high-purity air.
Product Introduction |
|
|
|
1.Gas for flame ionization detector(FID), flame photometry detector(FPD), nitrogen phosphorous detector (NPD). |
Technical parameters |
||||||||||||||
|
Additional Information:
© Athena Technology | Website Designed and Promoted by | ITology