Kinematic Viscosity Bath· Used for Determination of Viscosity of Fuels, Oils & Lubricants & Petrochem Raw Materials at constant temperatures.

• · Double walled, Exterior made of CRCA Steel - Powder coat finished.
• · Inner Leak proof argon welded tank made of Stainless steel – 304 Grade.
• · High density glass wool insulation to prevent heat loss & ensure constant temperature. Perfectly sealed Toughened glass window for clear visibility.
• · Pump cum Stirring assembly for High accuracy and temperature uniformity. Illumination by Fluorescent tube/lamp for clear visibility.
• · Temperature controlled by Dual display Microprocessor based PID Temp. Controller with PT-100 Sensor.
• · Temperature range from 5°C above ambient to 95°C.
• · Control Accuracy ± 0.5°C.
• · Temperature controller resolution : 0.1°C.
• · Drainage at the side of the bath is provided as outlet.
• · Operates on 230 Volts AC Single phase 50 Hz.

 

With sincere intentions to preserve and uplift our reputation in the industry, we are offering a comprehensive assortment of Kinematic Viscosity Bath. This viscosity bath is equipped with toughened glass window from both sides, top lid having holes for keeping viscometer holders, circulators pump on top of the body with controlled panel consists of switches & lamps for mains & controls fitted with digital display controller temperature range 5 ºC above to 95 ºC.

Features:

• 18" x 12" x 11" deep to accommodate 6/8 Viscometers
• Digital temperature Controller-cum-indicator instead of contact thermometer
• PID temperature Controller-cum-Indicator

Specifications:

• Internal Dimension LXWXD : 25 X20X30 cm, 35x20x30 cm
• Capacity :4 VM, 6 VM

Viscocity Clamps at Extra Cost Digital Timer range 0 to 999 minutes

Size Available:

• Kinematic Viscometer bath chamber size 12" x 9" x 12" deep to accommodate 4 viscometers. Temperature controlled by Contact Thermometer & Electronic relay. As above fitted with 2 glass panels on the exterior housing (Double Glass).
• Kinematic Viscometer Bath Chamber size 12" x 12" x 12" deep to accommodate 6 Viscometers.
• 18" x 12" x 11" deep to accommodate 6/8 Viscometers.

Optional:

• Digital temp. Controller-cum-indicator instead of contact thermometer.
• PID temp. Controller-cum-Indicator

Additional Information:

• Minimum Order Quantity: 1 Piece

Infrared Moisture Balance

Infra Red Moisture Balance 

 

Cat No : ATIR – 01 & 02

 

A reliable and sturdy instrument for an accurate determination of moisture contents

 

 

Available in 5/10/20/25 gms capacity 

 

Introduction:

 

Athena Infrared moisture balance is a very reliable and sturdy instrument for an accurate determination of the moisture contents of materials which do not undergo chemical changes when exposed to infrared radiation. Since drying and weighing of the samples is done simultaneously the instrument is specially useful for substances which quickly reabsorb moisture after drying. Observation can be taken quickly and the results obtained are accurate .

 

The instrument has been profitably utilized for a determination of moisture contents of agricultural soils, foods, chemicals, plastics, pharmaceuticals, contribution soils and other similar materials.

 

Description:

 

 

The instrument consist of a 250 watts infrared lamp, a sensitive torsion balance and Electronic Regulator/Transformer heat control device all housed in a compact cabinet made up of aluminum having robust design. The infrared radiation from the lamp I used for heating the sample. The temp is controlled by the Electronic Regulator / Transformer control device. The sensitive torsion balance uses magnetic damping to damp the vibrations of the pan. The instrument is directly calibrated in percentage of moisture between 0% and 100%. The aluminum pans are cheap and disposable. This helps avoid loss of time which could be spent each time to clean the pans after the experiment is done. The instrument is 230 volts (50 cycles) AC mains operated and supplied complete with one dozen disposable pans, pair of forceps & spatula, duct cover & instruction manual.

 

Optional Accessories: 

 

Automatic Digital / Manual timer with alarm can be used as an optional accessory with the infrared moisture balance. The main use of these timers is to present a time after which the timer unit automatically turns off the infrared lamp turns on again.

Additional Information:

• Minimum Order Quantity: 1 Unit